Parts only everything is in great condition comes from a one-owner machine contact all parts price differently feel free to make an offer on the part that you are interested inIf you have any questions or concerns feel free to contact
EVERYTHING HAS BEEN GONE THROUGH AND INSPECTED WAS GOING TO KEEP THE MACHINE FOR MYSELF DECIDED NOT TO DONT HAVE THE ROOM FOR IT THE MOTOR HAS BEEN SWITCHED OUT TO A SINGLE PHASE THE HEADSTOCK HAS BEEN TAKEN APART SO IT WAS FULLY INSPECTED IT IS STILL A PART THE MACHINE NEEDS A NEW BELT HAVING TO HEADSTOCK TAKEN APART MAKES IT 100 EASIER TO INSTALL THE NEW BELT I DONT HAVE THE ROOM FOR THE MACH...
Title: CNC Lathe Setup OperatorPay: $16/hr - $23/hr - depends on experienceLocation: North Hollywood, CA 91605Length: contract for three - six months + possibility of conversion to full-timeHours: second shift Monday - Friday2nd shift: 3:30pm - 12AM Summary: Under minimal supervision operates a CNC horizontal lathe to perform machining operations such as turning, boring, facing, and threading p...
Position overview Summary of Position: The Lathe Setup/ Machinist sets up and operates CNC turning machines to produce precision parts per engineering specifications without supervision. The Lathe Setup/ Machinist is fully capable to perform set up on several types of CNC turning machines. Essential Duties and Responsibilities: Understands and sets controls to regulate turning factors such as s...
Leblond 17 X 72 engine lathe good conditionFor further information please feel free to give us a call. You are welcomed to have a look at our store located at 490 E Lambert Rd. La Habra, CA.Office HoursM-F 800 AM - 430 PMSat 800 AM - 100 PMStore HoursM-F 730 AM - 430 PMSat 730 AM - 12 PMTags BUYERS AND SELLERS OF ALL KINDS OF NEW AND SURPLUS METALSAngle, Channel, Sheet, Plate, Tubing, Beams, Al...
single cut brake lathe new without table cost $5400 Im selling with table for only $3500I ACCEPT CREDIT CARDS WITH PROPER IDENTIFICATION
Skill Requirements Minimum of 7+ years set up experience Strong mechanical aptitude and problem solving skills Ability to read blueprints Do first Article Inspection Light Program Editing Ability to maintain close tolerances up to 0.0001 of an inch Able to lift up to 40 Lbs. Success Factors Attention to detail Ability to work independently and also with others in a team environment Positive can...
Title: CNC Lathe Setup OperatorPay: $16/hr - $23/hr - depends on experienceLocation: North Hollywood, CA 91605Length: contract for 3 - 6 months + possibility of conversion to full-timeHours: 2nd shift Monday - Friday2nd shift: 3:30pm - 12AM Summary: Under minimal supervision operates a CNC horizontal lathe to perform machining operations such as turning, boring, facing, and threading parts such...
Maquina para cortar rotores del sistema de frenos ,marca SNAP ON,modelo YA282, con manual de usoPara mas informacion comunicarse al ,for english text only$600-obo
has been disassembled and prepped for paint, I have all parts to re assemble, it needs 2 parts for gear box, I dont have time to finish it.
has been disassembled and prepped for paint, I have all parts to re assemble, it needs 2 parts for gear box, I dont have time to finish it.SELL OR TRADE, OBO.
Logan Lathe Leg Part Number LA-320-1Made In U.S.A.Single Leg$100 FirmCash OnlyCall Three2three3zero2832nine Classic South Metal Craftsman Custom Bridgeport Walker Wood Vintage Rockwell Bend Tools Turner Furniture Delta Machinist Tool
Vintage 1913 Lodge and Shipley metal lathe for sale. 5 step cone head with leather drive belt and 3 hp. Westinghouse electric motor on adjustable mount. All features in good working order, machine is in excellent condition. Includes two 12 Skinner chucks, one 3-jaw universal and one 4-jaw independent. One 14 4-jaw independent chuck which is worn and may be original to the lathe. 3 faceplates -1...
IN GOOD WORKING CONDITION CAN BE TESTED AT TIME OF PURCHASE IN 5 YEARS OWNING THIS MACHINE I HAVE NEVER USED THE QUICK CHANGE SHOWN IN THE LAST PICTURE IS HOW I USE IT I HAVE REMOVED ALL THE GEARS HAVE THEM AND SAFEKEEPING AND ALL I DID WAS RUN A SOLID PIECE OF ROUND STOCK THROUGH THE HEADSTOCK AND ADDED TWO STEP PULLEYS ONE TO THE MOTOR AND ANOTHER ONE TO THE ROUND STOCK INTOLERANCE THERE IS N...
KING METAL LATHE ABOUT 5 FT LONG MOTOR IS COMPATIBLE WITH 220 AND 110 POWER GOOD WORKING CONDITION VERY LITTLE USE ALWAYS WELL TAKEN CARE OF WAS ONLY KEPT AS A BACKUP CAN BE TESTED AT TIME OF PURCHASE COMES WITH CABINET SHOWN IN PICTURE ALSO COMES WITH A 3 4 JAW CHUCK UNFORTUNATELY I DO NOT HAVE THE STEADY REST THAT GOES WITH IT FORKLIFT AVAILABLE ON PROPERTY TO ASSIST WHATS LOADING QUESTIONS O...
1968 built machine . 12.5 inches swing x 20 inches between centers. Best American built machines through the years and perfect for the hobbyist or car restorer? comes with collet nose, 6 jaw and 4 jaw chuck. Quick change tool holders. Everything you need to complete your lathe needs , even has a taper attachment. Located in Los Angeles.
Very Nice toolroom lathe with taper attachment,with collet nose, quick change tool holders,3 jaw chuck Probably the best made American machine built at the time, 1942 a piece of American history. Would look great in your Garage or hobby shop. Best priced machine out there, located in Los Angeles
Similar
yesterdayGlendale, CA+6 milesJobs
Job Description Our busy North Los Angeles manufacturing client is seeking an experienced CNC Setup/Programming associate The job description of a CNC programmer requires the use of computer numerically controlled or CNC programs to be used for automating machinists tools by using computer generated electronic data. Tasks that were once manual can be automated through the use of CNC programs. P...
Job details Fabrication/ Machinist :Set up machines: lathes or mills as required to perform individual finish operations. :Set correct feeds and speeds as required for drilling, turning and tapping of different types of material. :Perform finish turning, drilling and tapping to final dimensions as specified on engineering drawings and standard procedures. :Read and interpret blueprints, schemat...
yesterdayHawthorne, CA+11 milesJobs
Marine Executive Association - Hawthorne, CA - To apply to this job, contact. Talentscale is in need of Composite Technicians for the Hawthorne area . Hawthorne, CA 5 yrs background Direct placement $22-30/hour Responsibilities Trimming and finishing of composite and composite metallic assemblies. Assembly of structures including setup, bonding and fastener applications. Use of solvents to prep...
Job DescriptionDirect Placement Opportunity. Southern CaliforniaTMAC Direct is a Pharmaceutical executive search firm, with a specific specialization in the Pharmaceutical and other related industries. Thank you for taking the time to review this opening by either reading the text or watching the video. To watch the videos, you may have to right click and open the link in a new tab.To watch a v...
Position details Summary of Position: General Machinist / Manual / Toolmaker Candidates must be experienced in setting up and running manual Mills, Lathes, grinders, hones, burnishing and deburring machines/equipment. Must be able to read blueprints and specifications. Must have general knowledge in the manufacturing of precision machined aerospace parts. Must be able to keep close tolerance di...
This 4-plex was built in 1931 in an established area of Glendale and has strong income potential. Units A and B are on the ground floor and units C and D are on the second floor. Each unit is a 2 bed, 1 bath and measure approximately 1,266 sq. ft. Property is being sold with Units A and D vacant and units B and C with the current tenants.Each unit features a spacious floor plan, open kitchen wi...
FOR SALE33 Ton Strippit 1250S CNC Turret PunchMfg. 1990SpecificationsCapacity33 TonsMax Sheet Size50x80Travels X-Axis80 Y-Axis50Throat Depth50Max Sheet Thickness14Max Hole Diameter3.5 in 10 gaugeTurret Stations33 Station w 2 AITooling TypeThinOverall Dimensions12x18x7.5HWeight approx.31,000 lbs.Equipped WithFanuc OP Control 2 Auto-Index StationsBall Transfer Table2 Work ClsMisc. Tooling Punches...
Komatsu Fork Lift 10,000 LBS Capacity -TOTAL HEIGHT 130-Propane -Good running machine-No OIL leaks -Good cushion rubber tiresFor further information please feel free to give us a call. You are welcomed to have a look at our store located at 490 E Lambert Rd. La Habra, CA.Office HoursM-F 800 AM - 430 PMSat 800 AM - 100 PMStore HoursM-F 730 AM - 430 PMSat 730 AM - 12 PMTags BUYERS AND SELLERS OF ...
POWRSweep 72 Attachment for Skid Steer Loader Pick Up Broom Model 89720For further information please feel free to give us a call. You are welcomed to have a look at our store located at 490 E Lambert Rd. La Habra, CA.Office HoursM-F 800 AM - 430 PMSat 800 AM - 100 PMStore HoursM-F 730 AM - 430 PMSat 730 AM - 12 PMTags BUYERS AND SELLERS OF ALL KINDS OF NEW AND SURPLUS METALSAngle, Channel, She...
1 + ... Next >